Webasto BCT010300C Repair Manual download pdf (Page 42)

Component Replacement - Refrigeration Unit

Webasto Product N.A., Inc. 40 www.techwebasto.com

™

10. Install new compressor in reverse order of removal

and service system according to the precautions and

recommendations beginning with Section 6.2.9.

Figure 37. Compressor replacement

9.3 Condenser Replacement

Read over Section 9.1 before proceeding with condenser

replacement.

1. Switch the power inverter OFF.

2. Remove refrigeration unit cover.

Be sure refrigerant is recovered using the

appropriate equipment before removing the

condenser. Webasto recommends that the system

be serviced using a recovery, recycling and

recharging station such as a Robinair

® unit or

similar equipment designed for R134a refrigerant

systems.

3. Disconnect refrigerant lines from condenser. Protect

open lines with plastic caps or wrap to prevent the

ingress of moisture and contaminates.

4. Remove the top plate over the condenser (4 screws).

5. Remove the 2 screws and 2 nuts holding the right

side support to the base.

6. Remove the 3 screws holding the condenser to the

feft side support and pull condenser free.

7. Inspect condenser for possible contamination by dirt,

water, etc. If contaminated, service system

according to the precautions and recommendations

in Section 6.2.8 after replacing the condenser.

8. Install new condenser in reverse order of removal

and service system according to the precautions and

recommendations beginning with Section 6.2.9.

Figure 38. Condenser replacement

Torque

28.5 lb-ft.

Torque

27.5 lb-ft.

Torque

11.0 lb-in.

Torque

6.0 lb-ft.

Torque

12.5 lb-ft.

Torque

27.5 lb-ft.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

Comments to this Manuals

No comments

Webasto BCT010300C Repair Manual Page 42

Comments to this Manuals