Component Replacement - Refrigeration Unit
www.webasto.us 43 Webasto Product N.A., Inc.
9.7 Ambient Temperature Switch
Replacement
1. Switch the power inverter OFF.
2. Remove refrigeration unit cover.
3. Locate the ambient temperature switch. It will be in
the area of the compressor, wire tied to the run-
capacitor. Refer to Fig. 42.
4. Replace as required.
5. Apply an anti-corrosive electrical grease to the
terminals and connect to switch.
6. If necessary, re-secure to the run-capacitor with a
wire tie as before.
7. Perform system checks to ensure proper operation.
Figure 42. Ambient temperature switch replacement
Comments to this Manuals