Webasto Thermo Top Z/C - D User's Guide download pdf (Page 4)

Thermo Top Z / C_________________________________Land Rover

Security system and relay

fan

Positioning the ends of the plate

Connection of the safety system (3/3) of

fan relay (3/1) and the ground terminal

on the mounting bracket as shown in Figure 3.

- Drill a bore of a diameter of 2.5 mm for the

security system, and a diameter of 4.0 mm

for the fan relay and backsplash.

- Fix the plate terminal system

security with metal screws 3,5 x13, and relay

fan and backsplash with metal screws

5.5 x9, 5

- Replace the security system on

connecting plate

- Connect the positive terminal of connector

the positive terminal of the starter

- Secure the wiring harness heating

the installation location of the

heating

- Secure the wiring harness from the clock

screening and flush with fan

cables available

- Set down the wiring harness from the pump

metering, along the cables located on the brake

headboard

TIP:

For all work on the cables, ensure

provide good protection against abrasion.

1 2 3 4 5 6 7 8 9 ... 17 18

No comments

Webasto Thermo Top Z/C - D User's Guide Page 4