Webasto Thermo Top Z/C - D User's Guide download pdf (Page 12)

Thermo Top Z / C_________________________________Land Rover

Fuel inlet

CAUTION:

Install the fuel conduit so that it

can be protected in case of falling rocks! In

sharp edges, protect against friction

the fuel conduit and the harness!

TIP:

Be sure to install the metering pump in the correct location,

To do this, refer to the "Installation Guide".

Dosing pump

- Make a hole diameter of 9 mm fixing

the metering pump (23/4) and insert a M6 nut.

- Attach the metering pump (23/4) metal stamp

with a flexible clamp (23/6) and a nut

collar, as shown in Figure 23

- Lead the electrical harness (23/2) of the dosing pump

and the fuel conduit Mecanyl (23/1) along the

fuel lines of the vehicle, of the spar

frame right to the dosing pump

- Shorten the harness (23/2) at

the dosing pump, the duct away

rubber, position the lid, close and secure the

harness to the dosing pump.

- Shorten the fuel line (23/1)

Mecanyl, and connect it to the upper face of the

metering pump (side of the cover), with a cable

hose (23/3) and a clamp

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Webasto Thermo Top Z/C - D User's Guide Page 12