Thermo 230/231/300/301/350 Installation
43
3.3. To install the Thermo 231 / 301 heater
The heater is to be secured with four M8 screws (Figure 7), body
washers and nuts.
IMPORTANT
The heat transfer base must be supported on a stable surface
connected to the floor of the car.
The securing screws are designed to fix the heater in position, not to
suspend it.
Fig. 6: Vertical installation position
Fig. 7: Hole pattern for the Thermo 231 / 301 heater
Th23_EA_degbfr_g.book Seite 43 Dienstag, 15. Februar 2005 2:03 14
Comments to this Manuals